1-day polyurea & polyaspartic coatings — UV-stable, won't yellow
Service area(904) 569-5257
Call
High-gloss coated concrete floor showing the finish quality across 904 Epoxy Coatings' Jacksonville services
Home / Services

Concrete & epoxy floor coating services in Jacksonville, FL

904 Epoxy Coatings installs 1-day polyurea and polyaspartic floor coatings on garages, pool decks, patios, driveways, and commercial floors across Jacksonville and the 904 — most run $4.50–$8.50 per square foot. Pick your surface below; every job starts with a diamond-ground slab and ends UV-stable.

Get a free quote See service areas
One system, every surface. Grind, coat, flake, polyaspartic seal — built for Florida heat, humidity & UV.
What we coat

One prep-first system, tuned to each surface

Every coating on this page is the same core idea — a mechanically diamond-ground slab sealed under a resin system that actually bonds, not a roll-on paint. What changes surface to surface is the build: a flake system for a garage that eats hot tires, a cool-touch slip-resistant finish for a pool deck, a fast-return industrial floor for a warehouse. Below is every surface we coat in Jacksonville, each with its own detailed page on cost, process, and finishes.

All coatings we install

Pick your surface

Garage floor coating

1-day flake or metallic systems that resist hot-tire pickup, oil, and Florida humidity.

Garage floors →

Pool deck resurfacing

Cool-to-the-touch, slip-resistant coatings that hide cracks and beat the sun.

Pool decks →

Patio & lanai coating

Turn cracked concrete into a finished outdoor room with UV-stable color.

Patios & lanais →

Driveway coating

Anti-slip, UV-stable finishes that handle heavy traffic and downpours.

Driveways →

Commercial & industrial

Fast-return warehouse, shop, and showroom floors with minimal downtime.

Commercial floors →

Metallic epoxy floors

Marbled, high-gloss "3D" finishes sealed with UV-stable polyaspartic.

Metallic finishes →

Polyaspartic vs. epoxy

Which system actually lasts in Florida — cure time, UV, cost, and lifespan compared.

Read the breakdown →

The Florida wedgePrep drives roughly 90% of a coating's lifespan. The peeling, bubbling, and hot-tire pickup you see on Jacksonville floors is almost never the resin — it's skipped grinding, untested slab moisture, or an unrepaired crack. Every service here starts the same way: diamond-grind the slab and moisture-test before a drop of coating goes down.

1 day
Typical residential install, grind to seal
15–20 yr
Expected lifespan of a properly prepped floor
$4.50–8.50
Per square foot installed, most residential jobs

Not sure which system you need?

Most Jacksonville homeowners land on a polyurea base with a polyaspartic topcoat — it cures in hours, resists hot tires, and won't yellow in the sun. Interior-only garages can still do well with a lower-cost epoxy flake system. If you're weighing the two, start with our polyaspartic vs. epoxy breakdown, or just call for a free, itemized quote and we'll match the system to your slab.

Straight answers

Jacksonville coating service questions

Which floor coating service is right for me?

It depends on the surface and the sun. Garages and interior floors do great with flake systems; outdoor pool decks, patios, and driveways need UV-stable polyaspartic so they won't yellow. Commercial floors are built for fast return-to-service. Every quote is free and matched to your slab.

How much do concrete floor coatings cost in Jacksonville?

Most residential coatings run about $4.50–$8.50 per square foot installed, so a 2-car garage is roughly $2,000–$4,250. Price depends on the system, the slab's condition, and the finish. See each service page for surface-specific pricing.

Do you cover my area?

We install across Duval, Clay, and St. Johns counties. See the full list on our service areas page — Mandarin, Southside, St. Johns, Nocatee, Ponte Vedra, Orange Park, Fleming Island, St. Augustine, Fernandina and more.

Where we work

Coatings across Jacksonville & the 904

We install every coating above throughout Northeast Florida — including St. Johns & Fruit Cove, Nocatee, RiverTown, Ponte Vedra, Mandarin, Southside, Orange Park, Fleming Island, World Golf Village, St. Augustine and Fernandina Beach. See the full service-area map.

One call covers every surface.

Get a free, itemized quote for a 1-day coating that actually lasts — whatever you're standing on.

Get a free quoteEmail us